New technology for extracting oil from oil sands could more than double the amount of oil that can be extracted from these abundant deposits. It could also reduce greenhouse-gas emissions from the process by up to 85 percent. The technology was developed by N-Solv, an Alberta-based consortium that recently received $10 million from the Canadian government to develop the technology.
Canada's oil sands are a huge resource. They contain enough oil to supply the U.S. for decades. But they are made up of a tarry substance called bitumen, which requires large amounts of energy to extract from the ground and prepare for transport to a refinery. This fact has raised concerns about the impact of oil sands on climate change. The concerns have been heightened by plans to build a new pipeline for transporting crude oil from the sands to refineries in the United States.
Most oil sands production currently involves digging up oily sand deposits near the surface and processing the sludgy material with heat and chemicals to free the oil and reduce its viscosity so it can flow through a pipeline. But 80 percent of oil sands are too deep for this approach. Getting at the deeper oil requires treating the bitumen underground so it can be pumped out through an oil well. The most common technique in new projects involves injecting the bitumen with steam underground. But producing the steam means burning natural gas, which emits carbon dioxide. And the oil that's pumped out is still too thick to flow through a pipeline, so it has to be partially refined, which emits still more greenhouse gases.