Cost effective installation through easy and fast fixing of large area roofing elements using standard installation techniques
No back-ventilation of solar panels necessary (lightweight laminates are easy to handle and can be field applied directly on metal)
No support structures needed
UL Listed as prepared roofing cover
Modules and inverter UL Listed
Integrated with flat 16 inch wide (minimum) metal roofing systems
Wind and water-tight roof
Suitable both for renovation and for new construction
Standard junction box or weather-tight quick connect system
Peel & stickadhesive backing capable of withstanding 160 mph wind loads
Output Cables: Multi-Contact connectors cable: 22" / 560mm, RHW AWG# 12, ~2.5mm
By-pass Diodes: Connected across every solar cell.
Laminate Encapsulation: Durable ETFE high light-transmissive polymer.
Adhesive: Ethylene propylene copolymer adhesive-sealant with microbial inhibitor.
Cell Type: 22 triple junction amorphous silicon solar cells 14 inch x 9.4 inch / 356 x 239mm connected in series.
Dimensions: (LWD) 197.25" x 15.5" x 0.12" / 5010 mm x 394mm x 3.0 mm
Weight: 16.3 lbs. / 7.40 kg
Solar panels are electrical devices and require skilled installation. Professional advice is recommended. Buyer assumes all responsibility for damages or loss.
Large volume orders please contact though email.